Redwood Fence Installation in Glendale: A Durable and Stylish Solution on Metal Posts

Recently, our team at ProHands Handyman completed a 60-foot redwood fence installation in Glendale, and this project became a great example of turning a technical challenge into a flawless result.

The main difficulty was a large neighbor’s tree growing right on the property line. We had to build the fence around the trunk, keeping both the tree and the fence structurally sound and visually appealing.

⸻

Why We Chose Redwood and Metal Posts

Redwood is one of the most popular fencing materials in Southern California. It offers natural resistance to decay, warping, and insects, and its warm tone perfectly complements the local architecture and climate.

To ensure maximum durability — especially near plants and moisture — we built the fence on galvanized metal posts.

This wood-and-metal combination provides the best balance of strength and appearance:

• Higher stability compared to traditional wooden posts

• Protection from ground moisture and rot

• Longer lifespan with minimal maintenance

• Improved wind resistance, even for 6-foot-tall fences

Each post was set in a concrete footing, ensuring a solid and lasting foundation for the entire 60-foot line.

⸻

Building Around the Neighbor’s Tree

One of the most interesting parts of this project was designing the fence around a massive tree standing directly on the boundary line.

Removing or cutting into the roots was not an option. Instead, we created a custom cutout section in the redwood panels to perfectly fit around the trunk while maintaining strength and alignment.

This process required:

• Precise on-site measurements and marking

• Careful cutting of redwood boards to follow the natural contour

• Reinforcing the frame around the cutout for structural integrity

• Keeping a visually even fence line, despite the irregular shape

The result was both functional and elegant — the tree remained untouched, and the fence looked continuous and professional.

⸻

Custom Gate and Concrete Entry Pad

Along with the fence, we built a custom redwood gate that matched the design and height of the rest of the fence.

The frame was reinforced with diagonal braces to prevent sagging and ensure smooth, long-term operation.

To make entry more convenient, we also poured a small concrete pad at the gate entrance.

This practical detail helps keep the area clean and provides a firm, level surface for walking.

The pad was leveled carefully, poured within wooden forms, and smoothly connected to the gate base for a clean, finished look.

⸻

Step-by-Step Construction Process

Here’s how the project was completed from start to finish:

1. Site preparation – Removal of old materials and line leveling.

2. Post installation – Metal posts set in concrete with precise spacing.

3. Framing – Horizontal rails installed to create a solid structure.

4. Board installation – Redwood planks mounted tightly with a straight, even alignment.

5. Tree integration – Custom cutout made around the tree trunk.

6. Gate installation – Strong, well-balanced wooden gate with durable hardware.

7. Concrete work – Smooth entry pad poured for cleanliness and easy access.

Throughout the process, we used stainless fasteners, kept all lines perfectly level, and allowed proper expansion gaps to prevent wood warping over time.

⸻

The Final Result

The finished redwood fence in Glendale is strong, elegant, and perfectly aligned with the landscape.

Metal posts give it structural stability, while the natural redwood brings warmth and beauty.

The gate opens smoothly, the concrete pad ensures a clean entry, and the tree cutout adds character — turning a challenge into a design highlight.

⸻

Benefits of Redwood Fences in Los Angeles

If you’re planning a new fence, here are a few reasons why redwood is one of the best materials to consider:

• 🌿 Natural and eco-friendly – sustainably sourced and visually warm

• ☀️ Weather-resistant – holds up to sun, rain, and humidity

• 🧱 Durable and long-lasting – needs less frequent replacement

• 🏡 Boosts curb appeal – adds value and character to any property

• 🔧 Low maintenance – occasional staining keeps it looking new

When combined with metal posts, a redwood fence can last for decades while retaining its beautiful appearance.

⸻

Why Homeowners Choose ProHands Handyman

At ProHands Handyman, we specialize in custom wood and metal fence installations throughout the Los Angeles area.

Our work is based on precision, reliability, and design that fits each property’s style and terrain.

We handle every step — from concrete foundations to the final finish — and always find creative solutions for unique situations like trees, slopes, or tight spaces.

⸻

Final Thoughts

This 60-foot redwood fence installation in Glendale shows how professional planning, durable materials, and skilled craftsmanship create a lasting and elegant result.

The fence blends naturally into the yard, remains structurally solid, and looks seamless from every angle.

If you’re considering replacing your fence or building a new one, we’d be happy to help you choose the best materials and design for your home.

📞 ProHands Handyman

Serving Los Angeles, Glendale, Burbank, Pasadena, and surrounding areas

Phone: 818-401-7766

Website: www.prohandshandyman.com